Strong chemistry in the fight against mineral deposits

Attention! Before using any product, you must read the manufacturer’s instructions for use, which specify the amount of the product for one-time use and the ebay data of action. It is necessary to protect the organs of vision, breathing and skin of the hands from accidental contact with acids and alkalis. Most products are not suitable for cleaning toilets in houses with plastic pipes and local treatment plants (septic tanks).

  1. Orthophosphoric acid (5-7% solution). This acid can be us to clean not only the toilet from limescale, but also the internal parts of the drain tank from corrosion. To use, pour about 100 g of the acid solution into the tank and toilet, rinse with water after 10-15 minutes and a comprehensive cleaning and maintenance the surfaces with a brush (brush). The acid is not expensive, does not affect enamel, rubber and plastic. Use, protecting your hands with rubber gloves.Orthophosphoric acid (5-7% solution)
  2. A 33% hydrochloric acid solution is a very strong toilet cleaner, but requires extreme caution when using (protect your hands and do not inhale the vapors). It is enough to wipe the walls and pour about one glass of acid into the toilet to quickly get rid of the dirt. TheĀ of the female reproductive system).
  3. White

Popular cleaning products. In stores, you can find many italy numbers (creams, gels, solutions) products creat specifically to combat old limescale deposits and urinary stones. Such products are appli for 30-60 minutes under the rim of the toilet, after which the surface is clean with a brush. If necessary, the procure is repeat several times. Products of popular brands: Cillit and “Toilet duck” (products bas on hydrochloric acid).

Toilet cleaner

Perhaps you will be interest in information about what is an anti-splash in a toilet?

Abrasive powders

All commercially available abrasive cleaners are quite effective in solving the problem of cleaning the toilet. However, the tiny granules often leave micro scratches on the surface of the sanitary ware, which causes limescale to reappear after a short period of time.

You might be interest in information on how to get rid of mold in the bathroom

In addition to preventive cleaning and emergency methods of dealing with toilet limescale, it is recommend to adjust the water supply to the tank. After all, excess water for flushing is not only financially disadvantageous, but is also one of the primary causes of limescale deposits. The easiest way to ruce the volume of the tank is to place 1-2 plastic bottles of water in it. This will ruce consumption by 2-3 liters with each use. And if you purchase new plumbing, choose a tank with a double button and a water-saving mode.

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top